When using the hose for drainage for Venta ION615 dehumidifier, the rubber attachment should be inserted into the water outlet, with the hose securely connected to it.
Please make sure the rubber attachment and hose are fitted tightly and that the hose is pushed all the way in.
The hose must lead to a suitable drain at a downward slope, with no sharp bends.
The hose should always be positioned lower than the unit to ensure proper drainage.
When removing the hose from the unit, please ensure that the rubber attachment is removed as well.
If the unit is used with the rubber attachment left inside the water outlet without the hose connected, this may cause water to leak from the unit.
Sample of Rubber attachment left in the water outlet (encircled)
Should you need further assistance please contact us at support@andatech.com.au