Ionmax ION401 Ionic Air Purifier
Possible Causes Electrical problem with UV socket.
Solution Contact Andatech Technical Support at support@andatech.com.au
Mon, 14 Jun, 2021 at 6:13 PM
Possible Cause #1 Too much dust has accumulated on the collection blades and ionizing wires
Solution Turn off the unit, unplug and clean the colle...
Mon, 14 Jun, 2021 at 6:13 PM
Possible Cause :
Too much dust has accumulated on the collection blades or ionising wire
Solution 1:
Turn off the unit, unplug and clean the c...
Mon, 14 Jun, 2021 at 6:13 PM
Try using Ezy Kleen stain remover available in the supermarket or online. NOTE: Please allow the blades to dry completely for 24 hours before usin...
Mon, 14 Jun, 2021 at 6:14 PM
Possible Cause #1 The UV power button has not been pressed.
Solution Press the UV power button.
------------------------------------------------...
Mon, 14 Jun, 2021 at 6:14 PM
Possible Causes Ionizing wire snapped.
Solution Contact Andatech Technical Support at support@andatech.com.au
Mon, 14 Jun, 2021 at 6:14 PM
Possible Causes Negative ion generator is faulty.
Solution Contact Andatech Technical Support at support@andatech.com.au
Mon, 14 Jun, 2021 at 6:14 PM
Possible Causes Electrical problem with internal components.
Solution Contact Andatech Technical Support at support@andatech.com.au
Mon, 14 Jun, 2021 at 6:15 PM